What are the signs of subsidence?

What is Subsidence?

You see strange cracks appearing in the walls, and you could swear they are widening. Your doors start opening on their own accord. Your wallpaper starts creasing without any influence of damp. Good news: no, your house is not haunted. Bad news: you do have a big problem.

All of the above are signs of subsidence, and subsidence is, to put it bluntly, one of the most serious structural issues a property can face. It takes place when the ground beneath a building starts sinking, pulling the foundations down with it. 

How to Check 4 Key Areas for Subsidence

Visible Cracks in Walls (Inside and Out)

The appearance of cracks is usually the biggest tell-tale sign of subsidence. Subsidence cracks have certain characteristics that make them impossible to mistake for minor plaster cracks:

  • Direction and Pattern: They are typically diagonal or stepped (following the mortar joints in brickwork).
  • Size: They are often wider than 3mm (in other words, thicker than a 10p coin).
  • Width Variation: They are frequently wider at the top and slimmer at the bottom.
  • Location: They are usually concentrated close to door frames and windows.

Sticking Doors and Windows

If your doors and windows suddenly begin sticking seemingly without reason, or indeed swinging open on their own accord, there is a simple explanation (that has nothing to do with the uncanny): structural instability caused by the foundation movement often warps the frames, making them misaligned and thus difficult to operate.

Issues with Floors and Walls

These signs often accompany more obvious subsidence-related cracks:

  • Sloping Floors: Sinking or sloping floors can indicate that the ground beneath your property is collapsing. Noticeably sloping floors suggest extensive damage (Category 4).
  • Gaps: Gaps might have started appearing beneath your skirting boards; watch out.
  • Wallpaper: Creased or wrinkled wallpaper where the wall meets the ceiling, without accompanying damp, can also be a sign of shifting walls – and thus subsidence.

Other Signs

If you happen to have an extension to the building, and that extension is moving or cracking away from the main property, this is a strong (and worrying) sign. Damage to the service pipes, which may fracture or become disrupted, can also be a sign of significant degree of subsidence.

Sometimes, the terms subsidence, heave, and settlement are used almost interchangeably. However, these all denote very different things…

Uncovering the Root Causes of Subsidence

The Role of the Soil Type

Clay-rich soils are common in the UK, especially in certain regions, and they are prone to respond very readily to moisture. Simply put, they shrink when dry and swell when wet. Unfortunately, this soil type is especially common in London and the south-east… in other words, the parts of the country that are the most popular with home buyers.

After a long dry spell, clay can, well, dry out and shrink – which, in turn, sometimes causes subsidence.

How Nearby Trees and Vegetation Can Contribute

Although the shrinkage of the soil can be dangerous, it is tree roots that are estimated to be the cause of about 70% of all subsidence cases. The Association of British Insurers (ABI) suggests, for example, that large trees like willows, poplars, oaks, and elms should be planted tens of meters away from the nearest building.

The Impact of Leaking Drains and Water Damage

Water leaks from damaged underground pipes or poor drainage can cause subsidence, too. They might do it in two ways:

  1. Erosion: In non-cohesive soils (like sand or gravel), escaping water can wash away fine soil particles beneath the foundation, thus creating voids.
  2. Softening of the soil: The water can soften the underlying soil, reducing its load-bearing capacity and causing the foundation to subside.

Immediate Action Plan if You Suspect Subsidence

Step 1: Document the Warning Signs

The first step is to carefully observe and document the evidence, such as the signs described above.

  • Take dated photographs of all visible cracks, both interior and exterior;
  • Measure the crack width at its widest point;
  • Monitor cracks over time; you can affix clear tape across the crack and check it regularly to see if it widens or breaks.
  • Keep a log of operational issues like sticking doors. Don’t forget to mention their locations.

Note: Avoid Quick DIY Fixes

Temporary cosmetic repairs can be an enticing alternative when it comes to seemingly minor issues. However, they only mask the symptoms without addressing the root cause. Potential DIY fixes also put your subsidence claim at risk as it will cover the natural symptoms and show DIY tampering with the initial problem.

Step 2: Schedule a Professional Subsidence Survey with Experts

A qualified, independent structural engineer can determine the issue, recommend the appropriate engineering approach, and guide your next steps. You can get in touch with us at GLS and book a free inspection to get to the root cause.

Step 3: Prepare for Insurance with an Expert Assessment

Most UK buildings insurance policies cover damage caused by subsidence. However, you must inform your insurer as soon as possible.

Exploring Long-Term Solutions for Treating Subsidence

As when it comes to health, the cost and the method of the solution depends on the severity of the problem (and for how long it’s been neglected).

An Overview of Traditional Underpinning

Concrete underpinning is a structural load transfer strategy which is often regarded as a traditional solution. It operates on the principle that the shallow soil is inadequate, and the solution is to bypass it entirely. This involves extending the existing foundation downwards to a deeper, more stable layer of soil or bedrock.

Modern Resin Injection Techniques Explained

Resin injection (also known as geopolymer injection or chemical underpinning) is an alternative method to the above. A specialized, expanding polymer resin is injected into small-diameter holes (typically 10mm to 20mm) drilled through or around the footing. The resin then expands rapidly, filling voids and compacting the surrounding soil, restoring its structural properties and increasing its load-bearing capacity. It can also be used to lift a settled structure towards its original level.

Is Resin Injection the Modern Fix for Subsidence?

Why Traditional Underpinning Is Becoming Less Common

There are several reasons for that, related to logistics, cost, and disruption:

  • Major Disruption and Excavation: Underpinning necessitates significant excavation beneath the existing footing, which is inherently invasive and disruptive. The resulting noise and dust often involves damage to existing landscaping… not to mention that it is rarely appreciated by the neighbours.
  • Slower and More Costly: It is, for all its effectiveness, an extremely labor-intensive and time-consuming procedure. Even the core process may take a few weeks, which, in turn, usually necessitates relocation while the work is going on.

Resin Injection: The Proven, Modern Alternative

The advantages of the resin injection stem mainly from its minimally invasive nature (a more detailed discussion of traditional underpinning vs. resin injection pros and cons can be found here).

  • Speed and Minimal Disruption: The projects are often completed in just 1 to 2 days. No relocation is usually required.
  • Targeted Repair: It is ideal for targeted repairs of minor, localized settlement issues, or for sites with severely limited access.
  • Price: it can cost as little as 1/3 of the typical quote for the traditional underpinning.

Need specific advice from our engineers?

Frequently Asked Questions

What do subsidence cracks look like?

Subsidence cracks exhibit several distinct characteristics that help differentiate them from minor cosmetic cracking:

Pattern: Subsidence cracks frequently follow a stepped pattern or stair-step pattern through the brick or block work.

Location: They are commonly found close to doors and windows, or near structural junctions.

Progression: Unlike their more harmless counterparts, subsidence cracks are progressive. They will grow noticeably longer and wider over a short period of weeks or months.

How can I check for subsidence?

Measure the width of the cracks at their widest point and monitor them over time to see if any changes have occurred. Affix a small piece of clear tape across the crack, log the date, and check it regularly (at least monthly, or, better yet, weekly) to see if the tape breaks or the crack widens. Monitor for about 12 months, to make sure you cover all seasons and the changes that come with them.

Are subsidence cracks wider at top or bottom?

Subsidence cracks are usually wider at the top than at the bottom. This happens because the foundation beneath that part of the building is sinking or shifting, which causes the wall above it to drop and pull apart.

As the structure moves downward, the upper section of the crack opens up more, while the lower end stays tighter. This top-wide pattern is one of the tell-tale signs that the movement is coming from the ground rather than from general wear and tear.

What size are subsidence cracks?

That depends on the damage category of the occurrence:

◦ Category 0: Hairline cracks of less than about 0.1 mm.
◦ Category 1: Up to 1 mm; usually restricted to internal wall finishes and can be treated easily.
◦ Category 2: Up to 5 mm; easily filled.
◦ Category 3 (“Serviceability”): Typical crack widths are 5 to 15 mm, or several cracks of about 3 mm.
◦ Category 4: Crack widths from 15 to 25 mm, and these may require breaking-out and replacing sections of walls.
◦ Category 5: Crack widths greater than 25 mm. This constitutes structural damage that requires major repair, up to complete rebuilding in some cases.

What can be mistaken for subsidence?

Heave and settlement are the two issues most often mistaken for subsidence.

Heave is the opposite of subsidence. Instead of the ground sinking, the soil pushes upward, usually when clay becomes saturated and expands. It can also happen after a large tree is removed and the soil rehydrates. Heave often causes raised floors, bulging walls, and cracks that slope upward or widen toward the bottom.

Settlement is downward movement caused by the soil being compressed by the weight of the building. It’s common in new builds and extensions and usually occurs within the first few years. Settlement cracks tend to be small, vertical, and consistent in width, and they normally stop growing once the ground has adjusted.
The key difference is that subsidence creates uneven, progressive movement, while settlement is usually uniform and heave pushes the structure upward.

Can subsidence signs only appear internally?

No, subsidence signs do not just appear internally. Actually, external visibility is a key indicator of such structural movement. External signs one can spot include cracks in the brickwork, especially in a stepped pattern, and gaps between bricks.

Conclusion

Subsidence is a serious problem for any property, and it can be caused by a multitude of causes – from tree roots to the changes in the state of clay soil. However, it is not a fatal sentence. A timely inspection can reveal the presence and the scale of subsidence at an early stage. If you would like to commission such an inspection, contact GLS here. 

Andy Evans

GLS Coatings

Get a free quote

Need our help with Resin Injection? Get help from our team today.
Send message

Get our help with Resin Injection today

Are you struggling with Resin Injection? Get a free quote from our helpful team today so we can help you.

What enquiry can we help you with today?

Request a Case Study

Fill in your details and we’ll send it to your inbox.

Request a Brochure

Fill in your details and we’ll send it to your inbox.