An estimated 1.5 million UK buildings still contain asbestos, and, if your commercial property was built before 1999, the chances are you’re already managing an asbestos roof. The core decision facing most business owners is: do you encapsulate, or do you remove?
How to Tell If Your Roof Contains Asbestos
The most common indicator is corrugated grey cement sheeting – the wavy profile familiar on warehouses, farm buildings, and garages across the UK. These sheets, most commonly found in “Profile 3” and “Big Six” configurations, typically contain 10-15% chrysotile (white) asbestos.
If your building was constructed or refurbished before November 1999, the Control of Asbestos Regulations 2012 (CAR 2012) requires you to presume that materials contain asbestos unless you have documented evidence to the contrary.
Encapsulation vs. Removal: Understanding Your Options
What Is Asbestos Roof Encapsulation?
Encapsulation involves applying a multi-layer coating system that seals fibres in place, prevents release, and restores the weatherproofing of the roof without removing the underlying sheets. Typical commercial installations use spray-applied systems, often alongside brushed or rolled primer and topcoat layers.
Encapsulation is appropriate when the asbestos cement is structurally sound and non-friable, when the building must remain operational during works, and when no demolition or major structural change is planned. You can read more about this method here.
What Is Asbestos Roof Removal?
Full removal includes the full detachment and, well, removal of the asbestos-containing roof sheets. Depending on the condition of the material, the work may qualify as fully licensed work, which demands HSE-licensed contractors, 14 days’ advance notice, and clearance air monitoring before reoccupation. These requirements, of course, tend to rather disrupt the functioning of most businesses for a while.
Removal eliminates ongoing monitoring obligations and clears the way for sale, refinancing, or structural change. The cost, however, is substantially higher than encapsulation. This subject is discussed in greater depth in this blog post.
How Much Would It Cost Me?
The cost differential between the two options is significant, particularly at commercial scale:
| Option | Typical UK Cost |
|---|---|
| Encapsulation coating | £8-45/m² depending on system |
| Full removal | £50-100/m² |
| Removal + replacement roofing | £80-170/m² combined |
| Professional condition survey | £750-£4,000+ depending on building size and access |
For a 2,000 m² warehouse, encapsulation can run to roughly £50,000-£70,000, while full removal and replacement of the same footprint typically costs £166,000-£365,000.
The Tax Relief Most Business Owners Don’t Know About
Land Remediation Relief (LRR), available under Part 14 of the Corporation Tax Act 2009, provides UK-registered companies with a 150% enhanced deduction on qualifying asbestos remediation expenditure. At the current 25% corporation tax rate, that yields a saving of 37.5p for every £1 spent – reducing your net cost to 62.5% of actual expenditure.
Critically, both removal and encapsulation can potentially qualify. HMRC’s own guidance confirms that expenditure on “containing” contamination – including coating and encapsulation works – is within scope, alongside full abatement.
Loss-making companies are not excluded: they can surrender the enhanced loss for a cash credit of 16% of qualifying LRR expenditure – equivalent to a 24% return on actual spend. Claims are made through the Company Tax Return (CT600), with a two-year election deadline for capital expenditure.
FAQ:
As a commercial tenant, am I responsible for managing my landlord’s asbestos roof?
Quite possibly, yes. Under CAR 2012, the duty to manage asbestos falls on whoever has a contractual obligation for the maintenance or repair of the premises. In most commercial leases written on Full Repairing and Insuring (FRI) terms, that obligation transfers substantially to the tenant, even when the asbestos is in a roof the tenant does not own. Landlords typically retain liability for structural elements and the external envelope, which can create shared duty holder status – but the tenant operating day-to-day in the building often carries the primary practical and legal burden.
Can spray foam be used to encapsulate an asbestos roof – and does it actually work?
Yes, but the product type and application method matter significantly. Closed-cell polyurethane spray foam – applied to the underside of roof sheets from inside the building – is a well-established and technically effective encapsulation method. The expanding foam bonds directly to the sheet surface, trapping loose fibres within its cell structure, adding meaningful structural rigidity, and delivering considerable thermal insulation (typically achieving conductivity values around 0.025 W/mK). For warehouses, this is particularly valuable because it eliminates condensation simultaneously – a common stock-damage problem that coating the exterior alone does not solve.
What should I look for when choosing an asbestos roof coating system – and does it need to be BBA approved?
BBA certification is the most meaningful independent quality marker available in the UK market for asbestos roof coatings. A current British Board of Agrément certificate means the product has undergone rigorous independent testing for adhesion, weathering resistance, durability, and – specifically – fibre suppression performance. It also provides a documented rated service life, which underpins the validity of any warranty the manufacturer or installer offers.
My asbestos roof is leaking – do I need to restrict access to the building?
Yes, at minimum to the area directly beneath the leak, and immediately. A leaking asbestos roof is not simply a waterproofing problem: water passing through cracked or delaminating sheets carries loose fibres into the building, and when that water evaporates, invisible asbestos residue remains on surfaces below. Chronic leaks can accumulate dangerous fibre concentrations with no visible dust and no warning. The correct immediate response is to restrict access to the affected zone, avoid any DIY repair attempts, and contact a UKAS-accredited asbestos surveyor or licensed contractor. Depending on the extent of damage and the condition of the material, remediation works may constitute notifiable non-licensed work (NNLW) – requiring notification to the HSE or local authority before works begin – or may escalate to fully licensed work if the material is significantly friable. Do not attempt to patch a leaking asbestos roof. We explore this matter in greater detail here.
What happens when an encapsulation coating reaches the end of its life – do you have to remove the asbestos at that point?
Not necessarily. If the underlying asbestos cement is still structurally sound at the end of a coating’s warranty period – typically 15-25 years for a professional-grade system – recoating is a viable option. A specialist survey will assess whether the substrate remains in adequate condition to support another treatment cycle. If it does, a further coating can be applied, deferring removal for another generation.
Can a loss-making company still claim tax relief on asbestos roof removal or encapsulation costs?
Yes, and this is one of the most commonly missed aspects of Land Remediation Relief. For companies that are profitable, LRR provides an enhanced 150% deduction from taxable profits – worth 37.5p per £1 spent at the current 25% corporation tax rate. But loss-making companies have a separate and equally valuable route: they can surrender the enhanced loss generated by the LRR claim for a cash payment from HMRC, calculated at 16% of the qualifying LRR expenditure. On a £100,000 remediation project, that equates to a cash receipt of £24,000 – paid even if the company has no corporation tax liability to offset.
Conclusion
Full removal is the right choice when material is actively deteriorating, when a sale or refinancing is in view, or when you want the issue resolved permanently rather than deferred. However, encapsulation is a solid long-term solution that is suitable for most cases where the situation has not yet reached the crisis point. It also tends to be far more cost-effective when it comes to large commercial properties. The starting point, in every case, is a UKAS-accredited management survey. You can contact us for the first consultation on the subject here.
