What Causes Internal Wall Cracks?

Finding a new fissure in an otherwise pristine wall can be a source of anxiety for any property owner. After all, just like a seemingly innocuous mark on human skin can indicate a deeper medical concern, wall cracks can act as symptoms of underlying health issues within the building’s structure – or, indeed, the ground it stands upon.

The Diagnostic Guide: Cosmetic or Structural?

Vertical Cracks 

Vertical cracks travel straight up and down and are frequently found where a wall meets the floor or ceiling. These tend to start appearing as the building weight naturally compacts the soil beneath it. In many cases, these are of low concern if they remain narrow and show no significant growth over time. 

However, if a vertical crack is wider at the top or bottom, it may indicate what is called differential settlement: namely, a situation where one part of the property is sinking faster than the rest.

Horizontal Cracks

Horizontal cracks run parallel to the floor and are considered a pretty urgent signal. These typically indicate that structural movement or heavy pressure – such as expanding soil or water – is pushing against the foundation wall, causing it to bow… or fail. 

Diagonal Cracks

Diagonal cracks usually slant at a 45-degree angle and often radiate from the corners of window or door frames. In brick or masonry walls, these often follow the mortar lines in a stair-step pattern. These patterns almost always signal foundation damage or significant differential settlement.

The Root Causes: Why is this happening?

Ground Movement

Ground movement is the primary driver of structural cracking. It is easily divided into two categories:

  • Settlement: This is the normal, relatively even downward movement that happens as a building’s weight makes the soil below itself compact. Most new builds will experience some minor settlement cracking within the first year or two.
  • Subsidence: This is the uneven sinking of the ground beneath an existing property. This, in turn, is often caused by soil problems, such as clay shrinkage during dry spells or soil being washed away by leaking drains.

Environmental Factors

  • Tree Roots: In the UK, trees like oaks, willows, and poplars planted too close to a building can extract massive amounts of moisture from the soil. This process causes clay soil to shrink, destabilizing foundations… and leading to cracks.
  • Dampness and Moisture: Water infiltration from leaking pipes, failed gutters, or high humidity can weaken structural materials and the ground support. 
  • Vegetation: apart from the already-mentioned trees, invasive vegetation can exert pressure on foundations, causing significant structural shifts.

How to diagnose a crack?

To determine if a crack is a simple eyesore or a structural threat, look at its physical characteristics:

  • Hairline-thin or wide? If it is less than 1mm wide, the crack is usually cosmetic, and has likely arisen from normal settling. Any crack wider than 5mm, however, warrants a professional evaluation.
  • Recurrent or not? If a crack returns after being filled, the underlying issue is ongoing and clearly requires a structural solution.
  • Surface or structural? Cracks in plaster are common in older homes, and often are a result of seasonal temperature changes or else simple aging of materials. However, if the crack extends deeper than the surface layer of paint or plaster and penetrates into the structural material itself, there is clearly a deeper problem.

Solutions: DIY or Not?

Cosmetic Repairs?

If a crack is less than 1mm wide and non-structural, it can technically be fixed on one’s own by using joint compound (putty) and paint. However, it is often more of a hassle and less effective than hiring a specialist even if the issue is really solely cosmetic. 

Resin Injection for Structural Issues

For structural issues like subsidence, resin injection is the modern, industrial-grade alternative to the more traditional concrete underpinning. To put it simply, it is enacted the following way:

  • Technicians drill small, 16mm holes (about the size of a coin) and inject an expanding geopolymer resin into the ground beneath the foundation.
  • The resin expands instantly, filling voids and compacting weak soil to lift the building back to its required level.
  • Resin injection requires no excavation, produces zero mess, and is often completed in just one or two days. This solves the cause (ground failure) rather than just patching the symptom (the crack).

The Financial Angle: Insurance and Costs

The average cost of fixing subsidence issues 

Property Scale / Type [cite: 50, 51] Method [cite: 50, 51] Average Cost / Rate [cite: 50, 51]
Small Residential (e.g., 2-bed terraced, ~4m wall) [cite: 50] Resin Injection [cite: 50] £4,000 [cite: 50]
Mass Concrete Underpinning [cite: 50] £7,000 [cite: 50]
Medium Residential (e.g., 3-bed terraced, ~5m x 4m wall) [cite: 50] Resin Injection [cite: 50] £10,000 [cite: 50]
Mass Concrete Underpinning [cite: 50] £14,000 [cite: 50]
Large Residential (e.g., 4-bed detached, ~8m x 6m wall) [cite: 50] Resin Injection [cite: 50] £15,000 [cite: 50]
Mass Concrete Underpinning [cite: 50] £22,000 [cite: 50]
Large Industrial Property or Warehouse [cite: 51] Resin Injection [cite: 51] £1,100 per m² [cite: 51]
Mass Concrete Method [cite: 51] £1,600 per m² [cite: 51]

Note: Underpinning work often requires Building Regulations approval. You may also require a planning application if the property is listed or in a conservation area.

FAQ:

What causes internal wall cracks in a house?

The most common cause is settlement, which occurs as a new building’s weight naturally compacts the soil beneath its foundation. This process typically finishes within the first year or two. However, more serious cracks are often caused by subsidence, where the ground beneath a property sinks unevenly.

What causes horizontal cracks in interior walls?

That depends on the floor level. In basement or below-ground walls, the primary cause is hydrostatic pressure, where saturated soil or expansive clay exerts an inward force that causes the cracks.

On upper floors, long horizontal cracks can be signals of a foundation settlement-related stress, indicating that the wall is no longer able to support the load placed upon it. These cracks represent a risk of complete wall failure, so they should always be inspected by a professional engineer regardless of their width.

Cracks in walls and ceilings: when to worry?

You should worry if:

  • The fissures are wider than 5mm (the width of a pencil);
  • You see horizontal cracks, or else diagonal cracks slanted at a 45-degree angle, as these almost always signal foundation damage;
  • The cracks are accompanied by sticking doors and windows, uneven or sloping floors, or visible gaps between the floor and skirting boards;
  • The cracks are radiating from the corners of door frames or window openings – these are more likely to be related to differential settlement.

How to tell if cracks in drywall are serious?

A crack is likely serious if it is in a high-stress location, such as on a load-bearing wall, a support beam, or near ceiling joints. Zig-zag patterns or long cracks that follow the lines of the drywall tape often indicate a failure in the drywall installation or a larger foundational shift.

What causes internal wall cracks in a bathroom?

Bathrooms are uniquely susceptible to cracking due to extreme moisture levels and humidity fluctuations. Water infiltration from leaking pipes, failed shower seals, or overflowing fixtures can soak into the drywall or plaster, weakening the material and causing it to fracture. 

What are the different types of cracks in walls?

The primary types include:

  • Vertical Cracks: These run straight up and down and are often “settlement” cracks. They are less concerning unless they are wider at the top or bottom.
  • Horizontal Cracks: These run parallel to the floor and signify high-priority structural stress or external ground pressure.
  • Diagonal Cracks: Usually jagging at a 45-degree angle, these indicate significant foundation movement.

When it comes to structural problems, our expert engineers can offer you highly effective, non-invasive solutions such as resin injection. These would stabilize the ground and resolve the root cause of these issues without making you break the bank. 

Need specific advice from our engineers?

Andy Evans

GLS Coatings

Get a free quote

Need our help with Resin Injection? Get help from our team today.
Send message

Get our help with Resin Injection today

Are you struggling with Resin Injection? Get a free quote from our helpful team today so we can help you.

What enquiry can we help you with today?

Request a Case Study

Fill in your details and we’ll send it to your inbox.

Request a Brochure

Fill in your details and we’ll send it to your inbox.